Additive Manufacturing with industrial maturity

With selective laser melting (SLM) for high-precision manufacturing and laser cladding (DED) for the repair and coating of components, DMG MORI combines two of the leading technologies in metallic 3D printing under one roof.

227
With an interchangeable build container, DMG MORI reduces downtime and setup times on the LASERTEC 30 SLM 3rd Generation, as follow-up orders can be prepared in parallel to ongoing production ©DMG MORI

With this holistic approach, the machine tool manufacturer underscores its commitment to innovation and sustainability. At this year's Formnext in Frankfurt, DMG MORI will demonstrate from November 17 to 20 how these additive processes and subtractive machining complement each other in seamless manufacturing processes and advance the Machining Transformation (MX). In Hall 12 at Stand D139, DMG MORI will showcase laser cladding using a powder nozzle on the LASERTEC 65 DED hybrid 2nd Generation and the powder bed process on the LASERTEC 30 SLM 3rd Generation. Both solutions combine years of experience in machine tool construction and innovative technologies for industrial manufacturing. Through reproducibility, precision, and cost-effectiveness, they actively contribute to industrialization. As a reliable partner throughout the entire lifecycle, DMG MORI supports the rapid introduction of these technologies and a secure production start with comprehensive consulting through ADDITIVE INTELLIGENCE. Here, experienced experts bundle extensive know-how for the industrial use of additive manufacturing processes.

LASERTEC 65 DED hybrid 2nd Generation

On the LASERTEC 65 DED hybrid 2nd Generation, DMG MORI integrates up to six processes in one workspace: milling, turning, and grinding, as well as additive manufacturing using a powder nozzle, complemented by laser-based preheating and the DMG MORI scan3D ©DMG MORI

With the combination of laser cladding and 5-axis simultaneous milling in one setup, the LASERTEC 65 DED hybrid 2nd Generation is a versatile machining solution that DMG MORI has consistently developed along the Machining Transformation (MX). The hybrid machine sets benchmarks in process integration and operates so productively that it elevates additive manufacturing to an industrial and series-capable level. This applies to both the production of highly complex geometries and the repair of heavily stressed components and the coating of workpieces with hard or wear-resistant materials.

The LASERTEC 65 DED hybrid 2nd Generation represents a holistic 6-in-1 process. It includes subtractive processes such as milling, turning, and grinding, as well as additive manufacturing using a powder nozzle. The laser-based preheating and the DMG MORI scan3D complement these technologies and create a unique process that allows for highly economical repair of wear parts in a single setup.

The DMG MORI scan3D creates a 3D model of a worn area before the area is specifically milled ©DMG MORI

The point cloud created with the DMG MORI scan3D is first compared with the target dataset to identify damage areas. Subsequently, the worn area is specifically milled. This creates a clean base for the welding process. In the next step, the workpiece can be preheated using the laser. Preheating minimizes the risk of stress cracks during material deposition.

During laser cladding, the machine monitors important parameters using sensors and cameras to ensure a process-safe operation. The subsequent milling of the final contour on the built-up workpiece zone also takes place on the LASERTEC 65 DED hybrid 2nd Generation without re-clamping. This allows for tight shape and position tolerances to be maintained and reduces throughput time compared to a conventional manufacturing chain. For sufficiently high requirements for geometry and tolerance fields, the process can be supplemented with grinding. Finally, the DMG MORI scan3D scans the repaired component again and checks the conformity with the specified target contour to ensure and document a perfect result.

The performance capability of the LASERTEC 65 DED hybrid 2nd Generation sets high standards for industrial use. Its multi-jet nozzle enables 5-axis material build-up with homogeneous powder distribution at the working point. DMG MORI has increased the build rate by 35 percent compared to the first generation, reducing workpiece costs by 47 percent. Compared to the predecessor model, workpieces up to 170 percent larger now fit in the workspace. Dimensions of ø 840 x 350 mm or ø 680 x 400 mm are possible. Based on the build volume, costs are reduced by over 70 percent.

LASERTEC 30 SLM 3rd Generation

The LASERTEC 30 SLM 3rd Generation combines the stability of a machine tool with innovative features such as the interchangeable build container. ©DMG MORI

The LASERTEC 30 SLM 3rd Generation from DMG MORI has been consistently developed for the requirements of industrial series production. The focus is on the ability to produce components not only productively but, above all, reproducibly in consistently high quality. For industrial users, it is not the quality of a single reference component that is crucial, but the ability to achieve consistently identical results over numerous build jobs, machines, and production periods.

Extensive validations and feedback from industrial practice confirm that the LASERTEC 30 SLM 3rd Generation has an extraordinarily high dimensional accuracy and repeatability of the manufactured components. The low variation of critical characteristics reduces scrap and rework, increases process reliability, and lays the foundation for economical additive series production.

The basis for this is a thermosymmetric machine concept that is consistently based on the proven design principles of DMG MORI's milling and turning machines. Targeted control of thermal influences ensures reproducible component properties and extraordinary process stability. Users benefit from reliable production processes, high planning security, and the ability to manufacture quality-critical components at any time in consistent quality. This makes additive manufacturing a robust production solution for industries such as aerospace, medical, and semiconductor.

At the same time, the LASERTEC 30 SLM 3rd Generation significantly increases productivity. Up to four fully overlapping lasers enable highly productive manufacturing without compromising on quality and repeatability. The interchangeable build container reduces downtime and setup times, as follow-up orders can be prepared in parallel to ongoing production. The closed handling concept also lowers inert gas consumption and increases the availability of the system. Together with the enlarged build space of 325 × 325 × 400 mm, the machine offers a manufacturing solution that combines productivity, cost-effectiveness, and reproducible component quality.

ADDITIVE INTELLIGENCE

In the consulting unit ADDITIVE INTELLIGENCE, DMG MORI consolidates extensive expertise for the industrial use of additive manufacturing processes. This experience is also based on its own production. Already today, more than 3,000 machine components are produced annually at DMG MORI in the Additive Manufacturing Reference Factory through additive process chains. With this knowledge, experts support companies throughout the entire process. They assist in evaluating an initial component idea and the constructive design, as well as in selecting suitable technologies and implementing them in series production. Machine developments, hybrid process chains, and digital solutions work together seamlessly. ADDITIVE INTELLIGENCE also takes over the production start-up if needed, so that customers can operate with full productivity from the very beginning after the installation of the additive process chain.

Contact:

dmgmori.com